GWC SS 1
GWC SS 1 is oil based Bitumen Emulsion with low viscosity, extended setting time and stability with cement that makes it an ideal product for Prime Coat application. It is a free flowing liquid at ambient temperature to IS 8887:2004 standards.
Typical Properties
| PROPERTIES | GWC RS 2 |
|---|---|
| 1. Residue on 600 Micron IS Sieve, % Max | 0.05 |
| 2. Viscosity @ 50°C (Saybolt Furol Viscometer), sec | 20-100 |
| 3. Storage Stability after 24 Hour, %, Max | Less Than 48 |
| 4. Binder Residue by Evaporation, % Min | 50 |
| 5. Coagulation at Low Temperature | Nil |
Advantages of Emulsion SS1
- Superior penetration into miniature pores of sub base
- Compatible with portland cement
- Low temperature curing allows the binder to penetrate into sub base
- Prevent ingress of underground water into the pave ments by plugging the capillary voids
- Enhances structural strength by strongly binding loose aggregates
- Easy to apply and hassle free
- Prevent Raveling and Rutting
- Environment friendly
Applications of Emulsion SS1
GWC SS 1 is ideally suited for Prime Coating on WMM/WBM surfaces and it has the ability to penetrate 8-10 mm deep into low porous WMM surface.
Recommended Rate of Application
| PROPERTIES | VISCOSITY OF PRIMER @60°(CENTISTOKES) | QUANTITY IN KG/10M2 AREA |
|---|---|---|
| Low Porous (WMM/WBM) | 0 – 60 | 6-9 |
| Medium Porous | ||
| (Cement Stabilized Soil Base) | 70-140 | 9-12 |
| High Porous (Gravel Base) | 250-500 | 12-15 |
- Use without diluting Bitumen Emulsion with any solvent.
- Use at ambient temperature.
- Roll the Bitumen Emulsion drums 5 times before using.
Availability of Emulsion SS1
GWC SS 1 is available in
- Bulk
- RC Drums 200 Kg
- MS Drums 200 Kg
- HDPE Drums 200 Kg